Model# BL100-5 Press Beam / Punch Line

Design Features Include:

• W5100x40 Web Press with 100 ton punch and 34" throat depth
• Four F5100x6 Flange Presses with 100 ton punch capacity
• Positive hydraulic stripping for both flange and web units
• Initial web height sensor (pneumatic)
• Die clearance retract cylinder to quickly lower the bottom die prior to material movement in either X or Y axis
• Three hydraulic Slide Pushers to maintain material against datum line
• Servo control positioning in center section to maintain part tolerances (even with short pieces)
• Hydraulic servo press positioning for both Web and Flange press units
• Vertical Hold-down devices with internal transducers to provide CNC web location
• Flange unit moveable with automatic material width sensor
• Main table is one piece construction with machine tool type levelers and floor isolators
• High volume power unit system with 20 and 40 horsepower options

"If everyone is thinking alike, then somebody isn't thinking." --- General George Patton